High-strength expanded metal mesh for walls and ceilingsBarrier Mesh™ is a tough, rigid, heavy-gauge steel mesh installed typically onto stud framing (both metal and wood), with gypsum sheathing applied to its surface to conceal the barrier mesh, thereby providing a significant barrier to security breach across that wall system.

head-of-wall deflection track - 1 & 2 hour systemBlazeFrame RipTRAK is a deflection track with an offset shoulder that represents the thickness of the gypsum board (5/8" or 1-1/4”). A second piece of gypsum board (wall cladding strips) is fit flush to the underside of the slab (w/sealant) or to a fluted deck (without castle cuts & sealant), and is then fastened to the shoulder. This allows the roof/floor assembly and the BlazeFrame RipTRAK to move in relation to the wall assembly. This also allows the wall cladding strips (the rip board) that is attached to the BlazeFrame RipTRAK to slide over the primary wall assembly.

Performance that stands up to deflectionFor superior head-of-wall vertical deflection, and the added benefit of horizontal drift movement, ClarkDietrich has your answer.

FAS-093X fire rated control joint - profile for protection of control jointsFire Rated Control Joint is a composite control joint with intumescent tape factory applied to the back side of the control joint.

ClarkDietrich Cold-Formed Steel C-Studs (C-Series™)Cold-Formed / Light-Gauge C-shaped framing members for axial load-bearing walls, curtain walls, tall interior partitions, floor joists and roof truss assemblies.

Steel Drywall Studs with smart edge™ technologyProSTUD Drywall Framing System (ProSTUD® and ProTRAK®) with Smart Edge™ Technology is the innovative steel drywall stud that sets a new industry benchmark for high performance. Its patented design combines high-strength steel with additional stiffening enhancements for a drywall framing stud previously unimagined.

replaces multiple jamb studs for interior rough openingsDesigned to replace conventional built-up jambs and headers while providing better results in half the time.

provides versatility for walls and ceilings contractors Designed to replace conventional boxed headers and built-up jambs and provide better results in half the time.

Facilitates the rapid erection of interior, nonload-bearing studsPrenotched bridging and spacing bar.

Used to secure u-channel to wall studs for lateral bracing The ClarkDietrich FastBridge™ clip is used to secure U-Channel or Cold Rolled Channel (CRC) to structural or non-structural wall studs when used in load-bearing, curtain wall or drywall framing applications.